Miller® TurboLite™ Edge Personal Fall Limiter
When The Job Takes You to the Edge: Depend on Miller
Do You Know Where Your Edges Are?
In work sites of every variety, edges are much more common than people realize – and they may pose a greater risk than you’d expect. Whether you’re laying roofing, traversing a beam, or simply working near the unprotected sides of an upper floor, falls over an edge are more hazardous than other falls. Without protection designed for edges, traditional lifelines risk being severed and the force upon the worker in the event of a fall is significantly increased. Honeywell estimates that as many as 80% of fall-protection users have applications in which a lifeline will come in contact with an edge in the event of a fall.
Related: IKAR Fall Arrest Devices Sharp Edge Testing
Edges in Fall Protection Applications
Sharp Edge Applications ≥ 0.005 in (0.13 mm)
Smooth Edge Applications ≥ 0.060 in (1.5 mm)
ANSI’s New Standard for Safety
As awareness of this threat grows, new safety standards have been defined. The most stringent is ANSI Z359.14-2014 LE (Leading Edge), which requires leading-edge protection to meet criteria such as:
- Edge radius as sharp as 0.005 in (0.13 mm)
- Safe for users connected at foot level
- Requires an integral shock-absorber at the worker connection
Honeywell Has Your Back: The Miller TurboLite™ Edge Series
Honeywell’s extensive series of Miller TurboLite Personal Fall Limiters (PFLs) is even more versatile with the introduction of the TurboLite Edge Series. Whether you work in construction, industrial, or even wind power, units for sharp and smooth edges including options for tie-back applications will help you ensure workers are safe in applications requiring foot-level tieoff or work near edges.
Make Confidence Your True Edge TurboLite Edge
PFLs are engineered to deliver the assurance you expect from Miller, and are available in a wide range of lengths with innovative features:
- Safe – Models are available for sharp and smooth edges and include an integral shock absorber to keep the lifeline intact in the event of a fall over an edge.
- Versatile – Can be connected at foot-level and above for workers up to 420 lbs.
- Repairable – If one unit of a twin model is damaged, the product can be sent into Honeywell for replacement.
- Compact and Lightweight – Reduce your fatigue, increase your productivity.
- Simple – Easy to install, easy to use.
- Configurable – A wide range of working lengths featuring cable, web, and tie-back options with a variety of lifeline connectors.
- Reduced fall clearance compared to a shock-absorbing lanyard – Effective solution for applications with limited fall clearance.
- Durability – High-impact nylon housing and abrasion-resistant webbing.
- Superior Mobility – Integral swivel design increases worker mobility and prevents lifeline from twisting.
- Twin models available – Provide for 100% tie-off connection.
The Versatility You Need. The Safety You Depend On.
Designed for performance in edge applications, TurboLite Edge PFLs offer versatility, enhanced user mobility and maximum safety.
What’s in It for Me?
- Provides you with protection designed for sharp edges and smooth edges eliminating the risk of your lifeline being severed and reducing the force that could result in the event of a fall.
- Keeps you safe in applications that require anchoring at foot-level.
- Perfectly suits your personal profile, with the capacity to support user weights up to 420 lbs. in all connections at foot-level and above.
- Cable Leading Edge units meet the most stringent safety standards including ANSI Z359.14-2014 LE.
Miller TurboLite™ Edge Competitive Advantages
Maximizes versatility for virtually any short-range application
The TurboLite Edge offering includes working lengths from 6-ft to 12-ft to accommodate a variety of applications.
Provides protection for a wider range of workers
With a 420-lb (189 kg) weight capacity for all connections down to foot-level, Miller TurboLite™ Edge takes adaptability to new heights.
Enables quicker, easier installation
Forget about pin buttons that are difficult to operate, and the troublesome need to connect the shock-absorber to the harness. One pin connection, a single click and you can focus on the task at hand.
Creates a better worker experience Lightweight, compact harness connector with free-floating shock absorber pack keeps worker cooler, and provides a more comfortable work experience.
Increases safety
Two buttons on harness connector, two different planes and two distinct actions provide the safest choice to prevent accidental disengagement. A red indicator line gives a warning if the pin is not properly engaged.
Lowers cost of ownership
Durable pin activation buttons and ballistic nylon shock absorber cover along with the ability to replace a damaged unit results in a decreased cost of ownership. Ensures compatibility with all Miller harnesses The product is compatible with all Miller harnesses, without any add-ons. No cumbersome straps to attach to the harness or special connectors are required for different harness sizes or configurations.
Prevents unit slippage
An optional Back D-Pad clip is included which is highly effective in preventing slippage while providing easier connection to the harness.
SHARP EDGE APPLICATIONS
Cable Lifeline for Sharp Edge Applications
TurboLite ™ EXTREME
- Designed for use in sharp edge applications with radius ≥ 0.005 in (0.13 mm)
- Meets ANSI Z359.14 Class B and Leading Edge requirements
- Galvanized cable lifeline
- Available in lengths of 6-ft and 9-ft
- Single and twin configurations
- Variety of lifeline connector options
Cable Lifeline with Web Tie-Back for Sharp Edge Tie-Back Applications
TurboLite ™ T-BAK ™ EXTREME
- Designed for use in sharp edge, tie-back applications with radius ≥ 0.005 in (0.13 mm)
- Meets ANSI Z359.14 Class B and Leading Edge requirements
- Galvanized cable lifeline with Vectran™ web tie-back
- Available in lengths of 8-ft and 11-ft
- Single and twin configurations
SMOOTH EDGE APPLICATIONS
Web Lifeline for Smooth Edge Applications
TurboLite ™ MAX
- Designed for use in smooth edge applications with radius ≥ 0.060 in (1.5 mm)
- Meets ANSI Z359.14 Class B requirements
- Honeywell Spectra® webbing lifeline provides outstanding chemical, abrasion, and cut resistance
- Available in lengths of 6-ft, 9-ft, and 12-ft
- Single and twin configurations
- Variety of lifeline connector options
Web Lifeline for Smooth Edge Tie-Back Applications
TurboLite ™ T-BAK ™ MAX
- Designed for use in smooth edge applications with radius ≥ 0.060 in (1.5 mm)
- Meets ANSI Z359.14 Class B requirements
- Abrasion resistant Vectran™ webbing tie-back lifeline
- Available in lengths of 7.5-ft and 10.5-ft
- Single and twin configurations
