
This kit contains
| Durahoist Davit Rescue Hoist System ARM (DH-23) | |
|
The two piece mast system comprised of the DH-23and DH-22 lower mast extensions are designed toprovide additional solutions when additional operatingreach is required. The two-piece mast system allowsuse of components in various configurations andapplications. Multiple winches and/or self retractinglifeline systems may be mounted as required. Toollessdesign breaks the system into lightweight,manageable components for storage, transport, andsetup. Rated at 8kN Maximum extention |
General Construction: Welded AluminumWeld Certification: AWSHardware: Gr.5, Zinc PlatedMaterial Structure: 6061-T6, 5052-H32, 7075-T6 AluminumBlock Anchor: 304 Stainless SteelFinish: Safety Yellow Powder Coat___________________________________________________________________Rated Capacity: 450 lbs (204kg)Working load limit @ minimum 4:1 Design FactorAnchor PointsA) Standard: Pin Position 1, 2, 3 and 4 1800lb (8kN)Weight: 34 lbs (15.5 kg) |
|
Ikar 15m Fall Arrest Block (HRA15A)
Fall Arrest Block with an integral recovery mechanism, 15.0m steelrope lifeline in an aluminium housing to EN360:2002 and EN1496 This aluminium housed fall arrest block is a sturdy, low maintenance device fitted with a steelrope lifeline, terminated with a steel double action hook. The attachment anchorage point on the fall arrest block is an open steel handle, suitable for connection via a Standard Karabiner type connector, or a Standard Karabiner type connector with an Anchorage Sling, or a Large Karabiner. This fall arrest block also has a built in recovery mechanism, which is engaged by pulling a pin on the side of the block and engaging a chain driven wheel. This then allows the device to be used to lift or lower a casualty post fall, or if they have become incapacitated in a confined space. The lifeline in this fall arrest block has been tested in a simulated fall over an edge and passed the German draft amendment EN360. However, not all "edges" will react in the same way as the tested steel edge, so when using this fall arrest block, every effort must be made to ensure that in the event of an arrested fall, the lifeline does not pass over an edge. The dimensions of this block are: 570 x 240 x 210 mm. |
Durahoist Mast Extension 45" (DH-22/45) General Construction: Welded AluminumLength: 45 inches / 1.14m |
| Durahoist C Shaped Davit Base (DH-24)
The WorkSAFEGEAR Hoist Systems Three Piece Portable Base Model is Includes 48 inch Reach davit arm, winches and adapter brackets sold seperatly. Fits Pelsue, Durahoist, Capital Safety, UCL and DBI products. |
Orders marked "In Stock" are typically shipped within 12-24 hours.
Delivery is usually made within 1-7 business days, depending on the destination and item weight.
Flat shipping fee applies for all orders up to a certain weight limit.
Thanks for subscribing!
This email has been registered!