The Universal Joint Assembly installs between the standard model DH-12 Hitch Mount Sleeve or hitch mount extensions and the attendant vehicle to compensate for uneven ground conditions at the site.
Materials
General Construction: Welded SteelWeld Certification: AWSFinish: Zinc PlatedHardware: Gr.5, Zinc PlatedPlating Specification: ASTM DesignationB633-85,Type II, SC2
Technical
Working Load: 450lbs (204kg) workingDesign Factor: Dependent on other system components, minimum 4:1 Design FactorProof Load: 90,000 in-lbs (10,200 N.m)Weight: 8.5lbs (3.9kg)
Application Restrictions
1. Only one extension at a time is to be used with a hitch mounting sleeve. Multiple hitch mount sleeve extensions are not to be used.2. The standard Hitch Mount Sleeve is to be used with a maximum 30” (762mm) offset mast.3. Anchoring to an attendant vehicle may not be permitted within certain jurisdictions. Ensure that use of this equipment does not violate any regulations within your area.4. The Universal Joint Assembly must be served directly to vehicle, not between a Hitch Mount Extension and Hitch Mount Sleeve.5. Each installation must be approved to local standards by a qualified engineer.
Orders marked "In Stock" are typically shipped within 12-24 hours.
Delivery is usually made within 1-7 business days, depending on the destination and item weight.
Flat shipping fee applies for all orders up to a certain weight limit.
Thanks for subscribing!
This email has been registered!