Fall Arrest systems are required to be inspected and in some cases tested on a periodic basis. This inspection and testing must be carried out by a recognised competent person.
Heightech offer a thorough inspection and tagging service for safety harnesses, lanyards and associated equipment.
All items undergo a detailed examination in accordance with Australian standards. AS/NZS1891.4:2009
AS/NZS1891.4:2009 demands that formal inspection procedures should be put in place by employers to ensure that personal fall protection equipment is given a thorough inspection and examination by a height safety equipment inspector before first use and at intervals not exceeding 6 months (more frequently if in hazardous conditions or if recommended by manufacturer), and after circumstances liable to have affected the integrity and safety of the equipment.
We offer an inspection service for the following equipment:
Upon completion of our inspection your equipment if safe will be returned with:
If any of your equipment fails inspection:
If one of our inspectors deems that your equipment is either unsafe, is out of date or is otherwise unfit for use the equipment will be quarantined to a pre-determined location.
If necessary Heightech can by prior arrangement organise and supply a replacement for equipment which fails to pass inspection.
SUMMARY OF INSPECTION REQUIREMENTS IN ACCORDANCE WITH AS/NZS1891.4:2009
Item |
Inspection Frequency |
Personal equipment including harnesses, lanyard assemblies, connectors, fall arrest devices including common devices |
To be inspected by Operator before and after each use. |
Belts, harnesses, lanyard assemblies and associated personal equipment. Fall arrest devices (external inspection only) Ropes and slings |
6 monthly inspection by a heigh safety equipment inspector (more frequently if recommended by manufacturer or supplier) |
Entry/re-entry of equipment to service |
All equipment to be inspected by a height safety equipment inspector before use. |
All items which have been stressed as a result of a fall |
Inspection by a height safety equipment inspector before further use. |
Orders marked "In Stock" are typically shipped within 12-24 hours.
Delivery is usually made within 1-7 business days, depending on the destination and item weight.
Flat shipping fee applies for all orders up to a certain weight limit.
Thanks for subscribing!
This email has been registered!